LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Ranger 2D Pickup, 2.3 D, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft Systems - Passive >> Programming >> Spare Key Programming Switch State Control

Spare Key Programming Switch State Control

NOTE: This feature is used when customer does not want spare key programming procedure accessible.
NOTE: Spare key programming switch is programmable using New Generation Star (NGS) tester. Spare key programming switch state can be viewed through PATS PID SPARE__KEY display in NGS tester.
  1. Connect New Generation Star (NGS) tester to Data Link Connector (DLC) located below steering column. Insert programmed encoded key in ignition and turn ignition switch to ON position. Using NGS tester with service card, enter SERVICE BAY FUNCTIONS. Select PCM from menu. Enter SECURITY ACCESS. This procedure will take 10 minutes to perform.
  2. After security access is granted, select SPARE KEY PROGRAMMING SWITCH from NGS menu. Select <DISABLE> to set spare key programming procedure inaccessible. Select <ENABLE> to set spare key programming procedure accessible.
scientia non olet · About LEMON Manuals