LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Mustang Base, 2D Coupe, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - External Controls >> General Procedures >> Cable Adjustment

Cable Adjustment

    NOTE: Make sure that the range selector lever is tight against the rearward overdrive stop.
  1. Place the transmission range selector lever in the overdrive position.
  2. Raise and support the vehicle.
  3. Loosen the manual control lever nut.
    Fig 1: Locating Manual Control Lever Nut
    G03853644
  4. Place the transmission manual control lever in the overdrive position.
  5. Tighten the nut on the manual control lever.
    Fig 2: Tightening Nut On Manual Control Lever
    G03853645
scientia non olet · About LEMON Manuals