Removal and Installation
WARNING: This page is about a different car, the 2005 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Prior to removal of the audio unit, it is necessary to upload the audio unit configuration information to the diagnostic tool. This information needs to be downloaded into the new audio unit once installed. For additional information, refer to MODULE CONFIGURATION
.
- Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL CENTER FINISH PANEL .
- Remove the 4 screws and the audio unit.
- Disconnect the electrical connectors and the antenna lead-in cable.
- To install, reverse the removal procedure.