Accelerator Pedal

WARNING: This page is about a different car, the 2005 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Accelerator Pedal

Courtesy of FORD MOTOR CO.

Disconnect the accelerator pedal sensor electrical connector.
- Upon installation, make sure that the red lock tab on the electrical connector is fully engaged to ensure a complete connection.
Remove the 3 accelerator pedal and sensor retaining nuts.
- To install, tighten to 9 Nm (80 lb-in).
Remove the accelerator pedal and sensor assembly.
To install, reverse the removal procedure.