LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Explorer Sport 4.0 K, RWD >> Repair and Diagnosis >> Electrical >> Starters >> Adjustments >> Digital Transmission Range Sensor

Digital Transmission Range Sensor

  1. Raise and support vehicle. Disconnect manual shift control cable. Disconnect Digital Transmission Range (DTR) sensor harness connector. Remove manual control lever nut. Remove manual control lever. Loosen DTR bolts.
  2. Manual shift lever must be in Neutral. Using DTR sensor Alignment Tool (T97L-70010-A), align DTR sensor slots. Tighten DTR sensor bolts. Install manual shaft outer nut. Tighten fasteners to specification. See TORQUE SPECIFICATIONS  . With manual lever in Overdrive, connect shift lever control cable. Connect DTR harness connector.
scientia non olet · About LEMON Manuals