LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Explorer Chassis >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window System >> Component Tests >> Battery Saver & One-Touch Down Relays

Battery Saver & One-Touch Down Relays

  1. Remove battery saver relay or one-touch down relay from relay module. Check relay continuity. Continuity should exist between relay terminals No. 1 and 2, and between relay terminals No. 3 and 4. See Fig 1 . Continuity should not exist between relay terminals No. 3 and 5. If continuity is as specified, go to next step. If continuity is not as specified, replace relay.
  2. Using a jumper wire, apply battery voltage to relay terminal No. 1. Using a second jumper wire, ground relay terminal No. 2. Continuity should now exist between relay terminals No. 3 and 5. If continuity is not as specified, replace relay. If continuity is as specified, relay is okay at this time.
Fig 1: Identifying Battery Saver & One-Touch Down Relay Terminals
G97E28187Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals