LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Excursion 5.4 L, RWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Disabling & Activating Air Bag System >> Activating System >> Component Replacement Activating Procedure

Component Replacement Activating Procedure

  1. On models equipped with seat belt pretensioners, remove air bag simulators from right and left pretensioner harness connectors and reconnect connectors. Tighten seat belt guide nut to specification. See TORQUE SPECIFICATIONS . Install trim panels and components removed to access seat belt pretensioners.
  2. On all models, remove air bag simulator from passenger-side air bag module harness connector and reconnect connector. Close glove box. Remove air bag simulator from clockspring harness connector and reconnect connectors. Install steering column opening lower finish panel.
  3. Connect negative battery cable. With all air bags installed and connected, perform system operation check. See SYSTEM OPERATION CHECK . Disconnect negative battery cable. Reprogram pre-set radio frequencies and set clock.
scientia non olet · About LEMON Manuals