LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Excursion 5.4 L, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine - 6.8L V10) >> Removal & Installation >> Engine >> Installation (All Models)

Installation (All Models)

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse removal procedure. Replace torque converter nuts with new ones. Tighten all bolts to specification. See TORQUE SPECIFICATIONS .
  2. When installing fuel lines, fit NEW fuel resistant "O" rings on fuel lines. Lightly coat "O" rings with clean engine oil before installing. Clean fittings, and replace garter spring (if necessary).
  3. Adjust all control cables and fluid levels. Refill cooling system. Evacuate and charge A/C system.
scientia non olet · About LEMON Manuals