Output Shaft Speed (OSS) Sensor: Installation

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Apply a light coat of petroleum jelly to the O-ring before installation.

Fig 1: Connecting OSS Sensor Electrical Connector

Courtesy of FORD MOTOR CO.

Install the OSS sensor.
- Connect the electrical connector.
Lower vehicle.
Check the transmission fluid level and add automatic transmission fluid as necessary.

Fig 2: Identifying Fluid Level Mark
Courtesy of FORD MOTOR CO.
Start the engine and move the transaxle range selector lever through all gear positions.