Forward Clutch: Disassembly

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Remove the forward clutch pressure, friction and steel plates.
1. Remove the retaining ring.
2. Remove the plates.
Fig 1: Removing Forward Clutch Pressure, Friction And Steel Plates
Courtesy of FORD MOTOR CO.
Using the special tool, install the forward clutch assembly in a suitable press.

Fig 2: Installing Forward Clutch Assembly In Press
Courtesy of FORD MOTOR CO.
Using the special tool, remove the forward clutch balance piston snap ring.

Fig 3: Removing Forward Clutch Balance Piston Snap Ring
Courtesy of FORD MOTOR CO.

CAUTION: If damage is found to the forward clutch balance piston seals, install a new balance piston.

Fig 4: Removing Forward Clutch Balance Piston

Courtesy of FORD MOTOR CO.

Remove and inspect the forward clutch balance piston.
Remove the forward piston return spring.

Fig 5: Removing Forward Piston Return Spring
Courtesy of FORD MOTOR CO.

CAUTION: If damage is found to the forward clutch piston seals, install a new forward clutch piston.

Fig 6: Removing Forward Clutch Piston Assembly

Courtesy of FORD MOTOR CO.

Remove the forward clutch piston assembly.