Transaxle Range Sensor: Installation
WARNING: This page is about a different car, the 2003 Mercury Sable, 2003 Ford Windstar, and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the transaxle range selector lever is in Neutral. Install the digital TR sensor and loosely install the bolts. See Figure.
- Using the special tool, align the digital TR sensor. See Fig 1. Install the manual control lever and nut. See Figure.
- Connect the shift cable. Verify that the shift cable is correctly adjusted. See SHIFT CABLE under ADJUSTMENTS. Connect connector.
- Install the engine air cleaner assembly. Connect the battery ground cable. Check for correct vehicle operation.