Front Brake Caliper Anchor Plate: Removal
WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the brake pads. For additional information, refer to BRAKE PADS .
- Remove and discard the 2 brake caliper anchor plate bolts and remove the brake caliper anchor plate.
- Make sure the steering stop is supported when the brake caliper anchor plate bolts are removed.
- Inspect the brake caliper anchor plate assembly.
- Check the guide pins and boots for binding or damage.
- Install a new brake caliper anchor plate if it is worn or damaged.
NOTE:
Do not remove the anchor plate guide pins. The guide pins are press fit to the brake caliper anchor plate. If the guide pins are damage a new anchor plate must be installed.