LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1367 (Automatic Transaxle/Transmission External Controls) >> Diagnosis And Testing >> External Controls >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the transmission external control.
  2. Visually inspect for obvious signs of mechanical and electrical damage; refer to the following charts:
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Shift lock actuator
    • Transmission control switch
    • SST (+/-) switches
    • Shift cable and bracket
    • Park sense switch
    • Central junction box (CJB) Fuse:
      • 204 (5A)
      • 205 (5A)
    • Damaged wiring harness
    • Loose or corroded connections
    • Powertrain control module (PCM)
    DIAGNOSTIC TROUBLE CODE CHART

    Five Digit DTC Component Description Condition Symptom Action
    P0815 SST +/- SST +/- circuit input signal failed. PCM has detected an incorrect voltage SST input. May not be able to shift in manual mode. GO to PINPOINT TEST C .
    P1780 TCS TCS input incorrect per selected position. TCS voltage incorrect. No overdrive cancel when range selector is moved. GO to PINPOINT TEST A .
  3. If the concern is not visually evident, determine the symptom. GO to SYMPTOM CHART .