LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> ZX2 Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Control System >> Removal & Installation >> Anti-Lock Brake Control Module (ABCM) >> Removal & Installation

Removal & Installation

  1. Ensure ignition is off. Disconnect negative battery cable. Move passenger's seat forward or rearward for easier access to control module mounting bolts.
  2. Loosen ABCM connector mounting bolt. Disconnect control module connector. Remove 2 front and one rear control module mounting bolts. Remove control module and bracket. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals