LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 272 (Electronic Engine Controls) >> Removal And Installation >> Throttle Position (TP) Sensor >> Removal

Throttle Position (TP) Sensor: Removal

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

    All vehicles 

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .

    2. Vehicles with 3.9L engine 

  2. Remove the throttle body. For additional information, refer to FUEL CHARGING & CONTROLS - 3.9L .

    3. Vehicles with 3.0L engine 

  3. Disconnect the throttle position (TP) sensor electrical connector.

    4. All vehicles 

    CAUTION: Failure to remove the TP sensor screws in the following manner will result in damage to the screws. First loosen the screws 1-2 full turns using a hand tool and then use a suitable high speed driver to complete the removal.
  4. Remove and discard the 2 screws and the TP sensor.
scientia non olet · About LEMON Manuals