LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1255 (Front Suspension) >> Removal And Installation >> Axle >> Installation

Removal And Installation: Axle: Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Do not tighten the nut at this time.
  1. Position the axle and install a new axle pivot bolt and nut.
  2. Install the radius arm. For additional information, refer to Radius Arm .
  3. Install the wheel spindle. For additional information, refer to Wheel Spindle .
  4. With the weight of the vehicle on the wheels, tighten the axle pivot nut to 175 Nm (129 lb-ft).
  5. Check and, if necessary, align the front end. For additional information, refer to SUSPENSION SYSTEM - GENERAL INFORMATION article.
scientia non olet · About LEMON Manuals