LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1215 (Instrument Panel And Console) >> Removal And Installation >> Power Point >> Removal

Power Point: Removal

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Power point cover may differ depending on location.
  1. Open the power point cover.
  2. Install the special tool in one of the power point socket slots.
    3. Fig 1: Installing Special Tool In Power Point Socket Slot
    GF0038824Courtesy of FORD MOTOR CO.
  3. Position the special tool so that it engages in the adjacent slot.
    4. Fig 2: Positioning Special Tool To Engage In Adjacent Slot
    GF0038825Courtesy of FORD MOTOR CO.
  4. Using the special tool, pull the power point socket out of the retainer.
    5. Fig 3: Pulling Power Point Socket Out Of Retainer
    GF0038826Courtesy of FORD MOTOR CO.
  5. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals