Moon Roof Control Switch
Remove moon roof control switch. Using an ohmmeter, ensure continuity exists between indicated moon roof control switch terminals when switch is in specified position. See table. See MOON ROOF CONTROL SWITCH CONTINUITY TEST table. Replace switch if it does not test as specified.
MOON ROOF CONTROL SWITCH CONTINUITY TEST
| Switch Position | Terminals No. | Resistance |
|---|---|---|
| Off | 1 & 2; 2 & 3 | Greater Than 10,000 Ohms |
| Up Or Closed | 1 & 2 | Less Than 5 Ohms |
| Down Or Open | 2 & 3 | Less Than 5 Ohms |