Specifications Index
RANGER SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING SEQUENCE | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | ON-VEHICLE TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 13-18 psi (.9-1.3 kg/cm2 ) | ||
| Water Pump R & I | |||
| 2.5L 4-Cylinder | WATER PUMP | ||
| 3.0L V6 | WATER PUMP | ||
| 4.0L V6 | WATER PUMP | ||
| Engine Mechanical | |||
| 2.5L 4-Cylinder | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | Normal oil pressure at 2000 RPM should be 40-60 psi (2.8-4.2 kg/cm2 ) with engine at normal operating temperature. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 3.0L V6 | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | Normal oil pressure at 2500 RPM should be 40-60 psi (2.8-4.2 kg/cm2 ) with engine at normal operating temperature. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 4.0L V6 | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | Oil pressure with engine at normal operating temperature is 40-60 psi (2.8-4.2 kg/cm2 ) at 2000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate Torque | |||
| 2.5L 4-Cylinder | 54-64 (73-87) | ||
| 3.0L V6 | 54-64 (73-87) | ||
| 4.0L V6 | TORQUE SPECIFICATIONS | ||
| Fuel System | |||
| Fuel Filter Location | Inside of frame rail under left side door, mounted in bracket. | ||
| Fuel Filter R & I | FUEL FILTER REMOVAL & INSTALLATION - RANGER | ||
| Pressure Release Procedure | |||
| 2.5L 4-Cylinder | FUEL PRESSURE RELEASE | ||
| 3.0L V6 | FUEL PRESSURE RELEASE & FUEL LINE CONNECTIONS | ||
| 4.0L V6 | FUEL PRESSURE RELEASE | ||
| Pressure Specification | FUEL PRESSURE SPECIFICATIONS | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | FIRING ORDER & TIMING MARKS | ||
| Spark Plug | SPARK PLUGS | ||
| 2.5L 4-Cylinder | |||
| Type | AWSF-32F Or AWSTF-32F | ||
| Gap | .042-.046 In. (1.07-1.17 mm) | ||
| Torque | 7-14 Ft. Lbs. (9-20 N.m) | ||
| 3.0L V6 | |||
| Type | SPARK PLUGS | ||
| Gap | .042-.046 In. (1.07-1.17 mm) | ||
| Torque | 7-14 Ft. Lbs. (9-20 N.m) | ||
| 4.0L V6 | |||
| Type | SPARK PLUGS | ||
| Gap | .052-.056 In. (1.32-1.42 mm) | ||
| Torque | 7-14 Ft. Lbs. (9-20 N.m) | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 100 Ft. Lbs. (135 N.m) WARNING: Failure to retighten wheel lug nuts at 500 miles after installation, may result in wheel coming loose and loss of vehicle control. |
||