Mirror Control Switch
Remove mirror control switch. Check for continuity between specified terminals while operating mirror control switch in appropriate direction. See MIRROR SWITCH TEST table. Continuity should exist between specified mirror control switch terminals. See Fig 1 . If continuity is not as specified, replace mirror control switch.
MIRROR SWITCH TEST
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Driver's Mirror | ||
| Up | 7 & 4; 6 & 8 | |
| Down | 7 & 6; 4 & 8 | |
| Left | 7 & 1; 6 & 8 | |
| Right | 7 & 6; 1 & 8 | |
| Passenger Mirror | ||
| Up | 7 & 2; 6 & 8 | |
| Down | 7 & 6; 2 & 8 | |
| Left | 7 & 3; 6 & 8 | |
| Right | 7 & 6; 3 & 8 | |