LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Pickup F150, 2D Pickup, 4.2 2, 4WD, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft Systems - Passive - F150 Light-Duty Pickups >> Programming >> Key Programming Without Using 2 Programmed Keys

Key Programming Without Using 2 Programmed Keys

NOTE: This procedure is used when customer needs extra ignition keys programmed and 2 programmed ignition keys are not available but system has 2 ignition keys programmed. A maximum of 8 ignition keys can be programmed. If 8 ignition keys are already programmed, this procedure will not allow any more to be programmed. The number of programmed ignition keys can be determined by accessing PATS PID NUMKEYS with NGS/WDS tester.

Insert unprogrammed ignition key into ignition. Turn ignition switch to RUN position. Connect New Generation Star (NGS) or Worldwide Diagnostic System (WDS) tester to Data Link Connector (DLC). Insert Ford Service Function (FSF) card in NGS/WDS tester. Perform security access procedure. See SECURITY ACCESS PROCEDURE  . Select IGNITION KEY CODE PROGRAM. Turn ignition switch to LOCK position. Disconnect NGS/WDS tester. Ignition key should now be programmed and be able to start vehicle.

scientia non olet · About LEMON Manuals