LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Mustang GT, 2D Convertible, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Removal & Installation >> Spindle Assembly >> Installation

Spindle Assembly: Installation

  1. To install, reverse removal procedures. Tighten ball joint stud nut, and install NEW cotter pin. DO NOT back off nut to install cotter pin; tighten to align cotter pin holes. Tighten shock-to-spindle attaching nuts to specification. See TORQUE SPECIFICATIONS .
  2. Lower and remove jack. Install remaining components in reverse order of removal. Check front end alignment and adjust as necessary. See appropriate SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.
scientia non olet · About LEMON Manuals