System Tests: Notes

Symptom	Perform Test
No Communication With Instrument Cluster	A
Theft Indicator Is Always/Never On-Theft Indicator Will Not Prove out	B
Vehicle Does Not Start-Theft Indicator Proves Out As Normal	(1)
Anti-Theft System Does Not Operate Properly- Vehicle Starts But Flashes A Fault Code	C
Anti-Theft Number Of Programmed Ignition Keys Is Below Minimum	D
Antenna Not Connected Or Defective Transceiver	E
PATS Ignition key Transponder Signal Not Received	F
PATS Received Incorrect Key-Code From Transponder	G
PATS Received Invalid Key-Code Format From Transponder	H
PATS Transceiver Signal Is Not Received	I
Security Identification Does Not Match Between Instrument Cluster & PCM	J
NVM Configuration Failure	K
(1) Using NGS tester, perform instrument cluster self-test. If any DTCs exist, perform appropriate test in accordance with DTC(s) received. See INSTRUMENT CLUSTER DTC INDEX  table under SELF-DIAGNOSTIC SYSTEM. If no DTCs exist, check for other possible causes of vehicle not starting.