LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Focus ZX3, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 2.0L ZETEC-E >> In-Vehicle Repair >> Valve Springs >> Installation

Valve Springs: Installation

    NOTE: Check that there is no dirt or particles within the valve stem grooves. Check the seating of the valve collets.
  1. Using special tools install the valve springs.
    • Insert the valve springs and the valve spring retainers.
    • Compress the valve springs and install the valve collets.
    • Disconnect and remove the air supply.
      Fig 1: Installing Valve Springs
      G03431648Courtesy of FORD MOTOR CO.
  2. Install the valve tappets.
scientia non olet · About LEMON Manuals