LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Expedition 5.4 L, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 524 (Anti-Lock Control-Traction Control & Stability Assist) >> Removal And Installation >> Accelerometer >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Lincoln Navigator and 2004 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The lateral and longitudinal accelerometer and the roll rate sensor are located within the same component as the accelerometer.
  1. Remove the front floor console. For additional information, refer INSTRUMENT PANEL AND CONSOLE .
  2. Remove bolts and the accelerometer.
    Fig 1: Removing Bolts And Accelerometer
    G02781406Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.