Sensor - Front, 4x2: Removal

WARNING: This page is about a different car, the 2002 Lincoln Navigator and 2002 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the front wheel speed sensor electrical connector.

Fig 1: Disconnecting Front Wheel Speed Sensor Electrical Connector (4x2)
Courtesy of FORD MOTOR CO.
Separate the sensor cable from the brake hose clips.

Fig 2: Separating Sensor Cable From Brake Hose Clips (4x2)
Courtesy of FORD MOTOR CO.
Remove the (A) front wheel speed sensor bolt and the (B) front wheel speed sensor.

Fig 3: Removing Front Wheel Speed Sensor & Bolt (4x2)
Courtesy of FORD MOTOR CO.