Fuel Injection Supply Manifold & Injectors: Installation

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2000 Mercury Sable, 2000 Mercury Mystique, 2000 Mercury Grand Marquis, 2000 Mercury Cougar, and 2000 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Position NEW "O" rings onto fuel injectors. Lightly lubricate "O" rings with clean 5W-30 engine oil. To complete installation, reverse removal procedure. Ensure injectors are properly seated. Tighten fuel injection supply manifold bolts to specification. See TORQUE SPECIFICATIONS .

Position NEW "O" rings onto fuel injectors. Lightly lubricate "O" rings with clean 5W-30 engine oil. To complete installation, reverse removal procedure. Ensure fuel injectors are properly seated. Tighten fuel injection supply manifold bolts to specification. See TORQUE SPECIFICATIONS .

When installing fuel injection supply manifold assembly, use NEW "O" rings. Lubricate "O" rings with clean 5W-30 engine oil. Push fuel injection supply manifold down to ensure all injector "O" rings are fully seated in fuel injection supply manifold cups and lower intake manifold. Install fuel injection supply manifold bolts and tighten to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure. Check for leaks when completed.

When installing fuel injection supply manifold assembly, use NEW "O" rings. Lubricate "O" rings with clean 5W-30 engine oil. Push fuel injection supply manifold down to ensure all injector "O" rings are fully seated in fuel injection supply manifold cups and intake manifold. Install fuel injection supply manifold bolts and tighten to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure. Check for leaks when completed.

CAUTION: During fuel injector installation, retaining clip must be in upper groove of fuel injector or fuel injector may become loose.

When installing fuel injection supply manifold assembly, use NEW "O" rings. Push fuel injection supply manifold down to ensure all injector "O" rings are fully seated in fuel injection supply manifold cups and intake manifold. Install fuel injection supply manifold bolts and tighten to specification. See TORQUE SPECIFICATIONS . Reinstall fuel injector retaining clips. To complete installation, reverse removal procedure.