LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 785 (Anti-Lock Brake System - Anti-Lock Control) >> Diagnosis And Testing >> Anti-Lock Control >> Pinpoint Tests >> Pinpoint Test H: DTC C1184 >> Testing

Pinpoint Test H: DTC C1184: Testing

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. H1 CHECK THE ANTI-LOCK BRAKE SYSTEM (ABS) MODULE FOR DTCS 
    NOTE: Repair all other DTCs before proceeding.
    • Key in OFF position.
    • Connect the diagnostic tool.
    • Retrieve and record the ABS module DTCs.
    • Is DTC C1184 retrieved? 
    • Yes  : GO to H2.
    • No  : CLEAR the DTCs. DRIVE the vehicle over a rough road. REPEAT the self-test. TEST the system for normal operation.
  2. H2 CHECK FOR WHEEL SPEED SENSORS RING DAMAGE 
    • Remove the wheel speed sensors.
      • CAUTION: Examine the wheel speed sensor wire carefully with a good light. Failure to verify damage in the wheel speed sensor wire at this time will lead to unnecessary component replacement and diagnostic time.
    • Inspect the wheel speed sensor rings for damaged or missing teeth. Rotate the wheel speed sensor rings to verify that all the teeth are checked.
    • Are the wheel speed sensor rings damaged or missing teeth? 
    • Yes  : INSTALL a new wheel speed sensor ring. For the front wheel speed sensor ring, REFER to FRONT WHEEL SPEED SENSOR RING . TEST the system for normal operation.

      • For the rear wheel speed sensor ring, REFER to REAR WHEEL SPEED SENSOR RING . CLEAR the DTCs. REPEAT the self-test. TEST the system for normal operation.

    • No  : CLEAR the DTCs. DRIVE the vehicle over rough pavement. REPEAT the self-test. TEST the system for normal operation.
scientia non olet · About LEMON Manuals