Brake System
WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
The braking system on the E-Series vehicle consists of the following components:
- An electronic hydraulic control unit (HCU)
- Vacuum booster power booster (E-150 to E-350)
- A Hydro-Boost® power booster (E-450 only)
- Master cylinder
- Front brake discs
- Rear brake discs
- Parking brakes
- wheel anti-lock brake system (4WABS)
The significant features of the brake system are as follows:
- All vehicles are equipped with rear disc brakes. For additional information, refer to REAR DISC BRAKE .
- l vehicles have front disc brakes. For additional information, refer to FRONT DISC BRAKE .
- The parking brake is foot-operated and, on the E-150, E-250 and E-350, uses a drum-in-hat brake system. The E-450 is equipped with a transmission-mounted parking brake. For additional information, refer to PARKING BRAKE & ACTUATION .
- The brake hydraulic system is split front and rear at the brake master cylinder. For additional information on the brake hydraulic system, refer to HYDRAULIC BRAKE ACTUATION .
- The brake power assist is vacuum-operated on the E-150, E-250 and E-350. The E-450 is equipped with a Hydro-Boost® power brake booster powered by the power steering pump. For additional information, refer to POWER BRAKE ACTUATION .
- All vehicles are equipped with a 4-wheel anti-lock brake system (4WABS). For additional information, refer to ANTI-LOCK CONTROL .