LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 715 (Engine System - General Information) >> General Procedures >> Rocker Arms - Inspection

Rocker Arms - Inspection

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not attempt to true surfaces by grinding. Check the rocker arm pad, side rails and seat for excessive wear, cracks, nicks or burrs. Check the rocker arm seat bolt for stripped or broken threads. Install new components as necessary or possible damage may occur.
  1. Inspect the rocker arm push rod bore for nicks, scratches, scores or scuffs. Install new components as necessary.
    Fig 1: Inspecting Rocker Arm Push Rod Bore For Nicks
    G03461973Courtesy of FORD MOTOR CO.
  2. Inspect the pad at the valve end of the rocker arm for indications of scuffing or abnormal wear. If the pad is grooved, install a new rocker arm.