LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Generators & Regulators) >> System Tests >> Test E: Generator Is Noisy

Test E: Generator Is Noisy

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Check accessory drive belt for damage and correct installation. Check mounting brackets and pulleys for looseness and damage. If problem does not exist, go to next step. If problem exists, repair as necessary.
  2. Disconnect generator 2-pin harness connector. Start engine and let idle. If noise still exists, go to next step. If noise does not still exist, replace generator.
  3. Turn ignition off. Connect generator harness connector. Start engine and let idle. Turn all accessories off. Using a stethoscope, check generator for unusual mechanical noise. If generator is source of noise, replace generator. If generator is not source of noise, isolate noise and repair as necessary.