Oil Pressure Test
WARNING: This page is about a different car, the 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and remove the oil pressure sensor from the engine.
- Connect the Oil Pressure Gauge to the oil pressure sender oil galley port.
- Run the engine until normal operating temperature is reached.
- Run the engine at the specified rpm and record the gauge reading.
- The oil pressure should be within specifications; refer to the in the appropriate ENGINE article.
- If the pressure is not within specification, check the following possible sources:
- insufficient oil
- oil leakage
- worn or damaged oil pump
- oil pump screen cover and tube
- excessive main bearing clearance
- excessive connecting rod bearing clearance