LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (Automatic Transaxle/Transmission) >> In-Vehicle Repair >> Transaxle Support Insulator - Front >> Removal

Transaxle Support Insulator - Front: Removal

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. .
  2. Remove the engine splash shield.
  3. Support the transaxle using a suitable jack.
  4. Remove the transaxle support insulator bolts.
    Fig 1: Removing Transaxle Support Insulator Bolts
    G03412288Courtesy of FORD MOTOR CO.
    5. NOTE: The transaxle may need to be slightly lowered to remove the support insulator.
  5. Remove the front transaxle support insulator.
    1. Remove the through bolt.
    2. Remove the support insulator.
      Fig 2: Removing Through Bolt
      G03412289Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals