Diagnostic Tools
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Below is an equipment list with corresponding part numbers:
REQUIRED SAFETY EQUIPMENT:
NOTE:
The rubber insulating gloves are to be worn while working on high-voltage components or high-voltage cables. They must be inspected before use and must be worn in conjunction with the leather outer glove. Any hole in the rubber glove is a potential entry point for high voltage. To inspect the glove roll it up from the open end until the lower portion of the glove begins to balloon from the resulting pressure. If the glove leaks any air it must not be used.
- Rubber insulating glovesNOTE: The safety face shield is to be worn while working on high-voltage components or high-voltage cables.
- Safety face shield
REQUIRED EQUIPMENT:
- Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool with functionality described under Scan Tool Setup and Functionality.
- Rotunda Smoke Machine, Fuel Evaporative Emission System Tester 218-00001 (522) or equivalent.
RECOMMENDED EQUIPMENT:
- Rotunda Vacuum/Pressure Tester 164-R0253 or equivalent. Range 0-101.3 kPa (0-30 in-Hg.) Resolution 3.4 kPa (1 in-Hg.)
- Rotunda Vacuum Tester 014-R1054 or equivalent. Range 0-101.3 kPa (0-30 in-Hg.)
- Digital Multimeter (DMM) FLU77-4 or equivalent.
- Spark Tester D81P-6666-A (303-D037) or equivalent
- Non-powered test lamp
OPTIONAL EQUIPMENT:
- Rotunda Fuel (Gasoline) pressure test kit 134-R0087 or equivalent (Use tool manufacturer's instructions.)