LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 2307 (Engine System - General Information) >> General Procedures >> Flywheel Inspection

Flywheel Inspection

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the flywheel for:
    1. any cracks.
    2. worn ring gear teeth.
    3. chipped or cracked ring gear teeth.
    4. scratches, nicks and discoloration.
    NOTE: The flywheel cannot be resurfaced, it must be replaced.
    Fig 1: Inspecting Flywheel
    G06167890Courtesy of FORD MOTOR CO.