LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Cruise Control Systems) >> Removal & Installation >> Speed Control Switches >> Removal

Speed Control Switches: Removal

WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Wait 2 minutes. Remove air bag nuts and washers from steering wheel. Disconnect air bag harness connectors from air bag sliding contact located between top of steering column and steering wheel.
  2. WARNING: Place air bag module on bench with trim cover facing upward.
  3. Remove air bag module. Disconnect horn/speed control harness connector from air bag sliding contact. Remove speed control switches. Disconnect switch wires.