LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1319 (Supplemental Restraint System) >> Removal And Installation >> Front Impact Severity Sensor >> Installation

Front Impact Severity Sensor: Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Make sure the mounting bracket and front impact severity sensor mating surfaces are clean and free or foreign material.
    NOTE: Align the locator tabs of the front impact severity sensor to the openings in the mounting bracket sheet metal
  1. Install the front impact severity sensor.
    2. WARNING: The tightening torque of the air bag front impact severity sensor retaining bolt is critical for correct system operation.
  2. Install the front impact severity sensor bolt.
    • Tighten to 12 Nm (9 lb-ft).
  3. Connect the front impact severity sensor electrical connector.
  4. Repower the system. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING  in this article.
scientia non olet · About LEMON Manuals