Roof Opening Panel Frame: Installation
WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
- If necessary, transfer the roof opening panel shield and glass components to the roof opening panel frame. For additional information, refer to ROOF OPENING PANEL SHIELD in this article .
- Position the roof opening panel frame to the vehicle and the 2 alignment pins.
- Install the 8 roof opening panel frame bolts.
- Tighten to 10 Nm (89 lb-in).
- Connect the roof opening panel motor electrical connector.
- Connect the 2 front and the 2 rear drain hoses.
- Install the headliner. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- Align the roof opening panel glass. For additional information, refer to ROOF OPENING PANEL ALIGNMENT in this article .
NOTE:
The roof opening panel frame is available separately or as an assembly with the roof opening panel shield and glass.