Digital Transmission Range (TR) Sensor: Removal

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. For additional information, refer to JACKING AND LIFTING .
Move the rubber boot back to gain access to the connector.

Fig 1: Moving Rubber Boot Back To Gain Access To Connector
Courtesy of FORD MOTOR CO.
Disconnect the digital TR sensor connector.

Fig 2: Disconnecting Digital TR Sensor Connector
Courtesy of FORD MOTOR CO.
Remove the shift cable from the manual control

Fig 3: Removing Shift Cable From Manual Control
Courtesy of FORD MOTOR CO.
Remove the outer manual control lever.

Fig 4: Removing Outer Manual Control Lever
Courtesy of FORD MOTOR CO.
Remove the digital TR sensor.

Fig 5: Removing Digital TR Sensor
Courtesy of FORD MOTOR CO.