Rear Disc Brake: Installation
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the adjustment hole knockout panel or access plug was removed, it is necessary to install an access plug to prevent the entry of contaminants.
- Clean any rust or debris from brake disc and wheel hub.
- Use parts cleaner to clean the front brake disc and hub surfaces.
- Apply a thin coat of anti-seize lubricant to the hub flange.
- Install the brake disc.
- Install the brake pads. For additional information, refer to BRAKE PADS .
CAUTION:
Do not allow the lubricant to make contact with the wheel studs, brake pads or brake disc.