LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1149 (Rear Disc Brake System) >> Disassembly And Assembly >> Rear Brake Caliper >> Assembly

Rear Brake Caliper: Assembly

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the cylinder bore, piston seal, caliper piston, and dust boot with clean brake fluid.
  2. Install the piston seal.
  3. Using the special tools, install the dust boot.
    Fig 1: Installing Dust Boot Using Special Tools
    G03944782Courtesy of FORD MOTOR CO.
  4. Install the brake caliper piston.
  5. Install the bleeder screw and cap.
  6. Install the brake caliper. For additional information, refer to BRAKE CALIPER .
scientia non olet · About LEMON Manuals