LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 1280 (Speed Control) >> Removal And Installation >> Speed Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Remove the 2 screws and the speed control switch.
    • Disconnect the speed control switch electrical connector.
    • To install, tighten to 7 Nm (62 lb-in).
  3. To install, reverse the removal procedure.