LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1998 >> Explorer 4D Utility, 5.0 P, RWD >> Repair and Diagnosis (Single Page) >> External Pages >> Different variant/trim >> Section 12 (Engine Controls - Remove/Install/Overhaul - 4.0L) >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different variant/trim than selected.

Disconnect negative battery cable. Remove any component necessary to gain access to PCM. For PCM location, see PCM LOCATION table. Loosen PCM connector retaining bolt (if equipped). Unplug harness connector from PCM. Remove 2 PCM mounting bolts. Remove PCM cover and PCM. To install, reverse removal procedure.

PCM LOCATION

Model Location
Explorer & Mountaineer In Cowl Area (Passenger Side)
scientia non olet · About LEMON Manuals