Mirror Control Switch
WARNING: This page is about a different car, the 1998 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
Remove mirror control switch and disconnect harness connector. Check continuity between mirror control switch terminals with the switch in the appropriate position. See Fig 1 . Refer to the POWER MIRROR SWITCH TERMINAL IDENTIFICATION table. If resistance is not as specified, replace mirror control switch.
POWER MIRROR SWITCH TERMINAL IDENTIFICATION
| Switch Position | Check Between Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 1 & 7; 5 & 6 | |
| Down | 1 & 6; 5 & 7 | |
| Left | 1 & 4; 5 & 6 | |
| Right | 1 & 6; 4 & 5 | |
| Right Mirror | ||
| Up | 1 & 8; 5 & 6 | |
| Down | 1 & 6; 5 & 8 | |
| Left | 1 & 3; 5 & 6 | |
| Right | 1 & 6; 3 & 5 | |