Illuminated Entry Does Not Operate With Remote Transmitter
- Check operation of illuminated entry with all remote transmitters. If illuminated entry will not operate with all remote transmitters, go to next step. If illuminated entry operate with some remote transmitters but not with all, reprogram malfunctioning remote transmitter(s). See REMOTE TRANSMITTER under PROGRAMMING. If malfunctioning transmitter(s) still do not operate after reprogramming, replace remote transmitter(s). Retest system.
- Check operation of interior lights. If interior lights operate properly, go to next step. If interior lights do not operate properly, repair interior lighting, then retest system.
- Measure voltage by backprobing door lock control module connector C336 terminal No. 7 and ground while pressing UNLOCK button on remote transmitter. See Figure . If voltage is greater than 10 volts with UNLOCK button pressed, repair Black/Light Blue wire, then retest system. If voltage is less than 10 volts with UNLOCK button pressed, replace door lock control module, then retest system.