LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1998 >> Contour Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests 2.0L & 2.5L >> Relays & Solenoids >> Relays >> Fuel Pump Relay

Fuel Pump Relay

  1. Turn ignition off. Leave fuel pump relay disconnected. Measure resistance between terminals No. 1 or No. 85 and all other terminals. To identify fuel pump relay terminals, refer to numbers molded on relay.
  2. One resistance measurement should be 40-120 ohms; all other measurements should be greater than 10,000 ohms. Replace fuel pump relay if resistance is not as specified. If resistance is okay, see CIRCUIT TEST KA in appropriate article for additional testing procedures:
scientia non olet · About LEMON Manuals