LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Windstar GL, 3.0 U >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Remove/Install/Overhaul - 3.8L) >> Ignition System >> Powertrain Control Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1996 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect battery ground cable. Remove cowl top vent panel. Loosen PCM connector retaining bolt (if equipped). Unplug harness connector from PCM. Remove 2 PCM mounting bolts. Remove PCM cover and PCM. To install, reverse removal procedure.

PCM LOCATIONS

Model Location
Windstar Cowl Area (Passenger side)
scientia non olet · About LEMON Manuals