LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Taurus G, AX4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Driver-Side Air Bag Module >> Removal

Driver-Side Air Bag Module: Removal

WARNING: This page is about a different car, the 1996 Mercury Sable and 1996 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see SERVICE PRECAUTIONS  . Disable SRS. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
  2. Remove nuts/bolts and washers retaining air bag module to steering wheel. See Fig 1 . Disconnect air bag module wiring connector from clockspring connector. Disconnect speed control connector, if necessary. Remove air bag module.
Fig 1: Removing Driver-Side Air Bag Module
G96G14056Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals