LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Taurus G, AX4S >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Power Door Lock System & Trunk Release System) >> Component Testing >> Power Door Lock Switch >> Mustang

Power Door Lock Switch: Mustang

WARNING: This page is about a different car, the 1997 Mercury Cougar, 1997 Ford Thunderbird, and 1997 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove door lock switch. With switch in neutral position, continuity should exist between terminals No. 1 and 2 and between terminals No. 4 and 5. See WIRING DIAGRAMS . Continuity should not exist between terminal No. 3 and any other terminal.
  2. With switch in lock position, continuity should exist between terminals No. 3 and 4 and between terminals No. 1 and 2. Continuity should not exist between terminal No. 5 and any other terminal.
  3. With switch in unlock position, continuity should exist between terminals No. 2 and 3 and between terminals No. 4 and 5. Continuity should not exist between terminal No. 1 and any other terminal. If continuity is not as specified, replace switch.
scientia non olet · About LEMON Manuals