Fuel Injector Check
WARNING: This page is about a different variant/trim than selected.
Start engine and allow to idle. If engine will not start, crank engine for 10 seconds. Using a stethoscope, listen for clicking sound at each injector. If clicking sound is heard, fuel injector is operating. If clicking sound is not heard, go to step 8) of CIRCUIT TEST HD in G -TESTS W/CODES article.
INDIVIDUAL INJECTOR RESISTANCE (1)
| Engine | Ohms | ||
|---|---|---|---|
| 2.5L | 11-18 | ||
|
|||
NOTE:
For additional fuel injector testing, go to step 8) of CIRCUIT TEST HD in TESTS W/CODES
article.